VIP02W1 vs VIP08W2
| Part Number |
|
|
| Category | Circular Connectors | Circular Connectors |
| Manufacturer | ITT Cannon, LLC | ITT Cannon, LLC |
| Description | CONN PNL RCPT THREAD POST PIN | CONN R/A PLUG THREAD POST SKT |
| Package | - | - |
| Series | VIP | VIP |
| Mounting Type | Panel Mount, Flange | Free Hanging (In-Line), Right Angle |
| Termination | Threaded | Threaded |
| Ingress Protection | IP67 - Dust Tight, Waterproof | IP67 - Dust Tight, Waterproof |
| Current Rating | 700A | 700A |
| Voltage - Rated | 1500VAC, 2000VDC | 1500VAC, 2000VDC |
| Contact Finish | Silver | Silver |
| Orientation | Keyed | Keyed |
| Number of Positions | 1 | 1 |
| Connector Type | Receptacle, Male Pins | Plug, Female Sockets |
| Fastening Type | Threaded | Threaded |
| Shell Material, Finish | Thermoplastic | Thermoplastic |
-
1. How to get pins out of circular connector
Use professional tools: For some connectors, professional tools may be required to safely remove pins. For example, the small two-petal needle remover mentioned may not be very easy to use, but if there is no other better method, you can try to use it. If the connector is damaged or the repair cost is too high, consider replacing a new connector.
-
2. How to solder a circular connector
1. Remove the insulator, prepare the soldering iron and needle-nosed pliers or tweezers;
2. Place the blade of the soldering iron tip close to the solder joint, and keep the soldering iron at an angle of about 60° to the horizontal plane so that the molten tin can flow smoothly from the soldering iron tip to the solder joint. The time the soldering iron tip stays at the solder joint should be controlled to 1-2 seconds;
3. Make sure that the insulator is not burned, the tin on the solder joint is smooth, burr-free, and there is no cold solder joint, and the definition of the solder wire meets the requirements of the drawing. -
3. What is the circular connector called
Circular connectors are also called circular electrical connectors, sealed circular connectors, aviation plugs, waterproof connectors, etc. Different names for different usage environments: waterproof connectors, waterproof plugs; sealed circular connectors, etc.
-
4. How many types of connectors are there?
1. Circular connector,
2. RF connector,
3. Rectangular connector:
4. SMB connector:
5. BNC connector;
