W3M vs PLB4G120005
| Part Number |
|
|
| Category | Circular Connectors | Circular Connectors |
| Manufacturer | Switchcraft Inc. | ITT Cannon, LLC |
| Description | CONN RCPT 3PIN MALE R/A PANEL MT | CONN RCPT FMALE 5POS GOLD SLDR |
| Package | - | - |
| Series | Q-G? W | PL |
| Features | Mounting Hardware | - |
| Mounting Type | Panel Mount, Right Angle | Panel Mount, Bulkhead - Rear Side Nut |
| Termination | Solder | Solder Cup |
| Orientation | Keyed | 0° |
| Number of Positions | 3 | 5 |
| Connector Type | Receptacle, Male Pins | Receptacle, Female Sockets |
| Fastening Type | Push-Pull | Latch Lock, Push-Pull |
| Shell Material, Finish | Zinc Die Cast, Nickel Plated | Polysulfone (PSU) |
| Ingress Protection | - | IP50 - Dust Protected |
| Current Rating | - | 7A |
| Contact Finish | - | Gold |
-
1. How to wire a circular connector
1. Insert the wire into the pin hole inside the connector to ensure that the metal conductor is in full contact with the pin.
2. Use wire twisters to tighten the screws or clips on the connector to ensure good and firm contact between the connector and the wire.
3. Check if there is any exposed metal surface on the connector. If necessary, re-strip it.
4. Wrap the connected wires with electrical tape to prevent loosening or short circuit problems. -
2. What does s mean in circular connectors sealcon
S-Video, the full name of Separate Video, is also known as SUPER VIDEO. It is a video signal transmission standard used to separate the brightness and color of the video signal to avoid mutual interference between brightness and color when the mixed video signal is output.
-
3. How to remove a circular electrical connector
1. Loosen the locking ring. To remove a circular electrical connector, you first need to loosen the locking ring;
2. Remove the sealant. There is a sealant on the connector, which needs to be removed first.
3. Remove the terminal. First, loosen the terminal fastening or open the slot, and then carefully separate the plug and the socket; -
4. What is the difference between circular and rectangular connectors?
The most essential difference is the shape difference, followed by the difference between parameters, such as voltage, working scene, current, etc. What is the difference between circular connectors and rectangular connectors in terms of appearance, size, structure, color, and function? In terms of appearance, the circular connector is a perfect circle, and the rectangular connector is square. The size can be designed the same.
The structure is a circular track and a square track, and the colors are all industrial electroplating colors.
