WR-L70S-VFH30-N1-R1000 vs 61082-103000
| Part Number |
|
|
| Category | Rectangular Connectors - Arrays, Edge Type, Mezzanine (Board to Board) | Rectangular Connectors - Arrays, Edge Type, Mezzanine (Board to Board) |
| Manufacturer | JAE Electronics | Amphenol ICC (FCI) |
| Description | CONN PLUG 0.5MM 70POS STR SMD | CONN RECEPT 100POS .8MM DUAL SMD |
| Package | - | - |
| Series | WR | BergStak?, MezzSelect? |
| Features | Solder Retention | Board Guide |
| Mounting Type | Surface Mount | Surface Mount |
| Contact Finish | Gold | Gold |
| Number of Positions | 70 | 100 |
| Pitch | 0.020" (0.50mm) | 0.031" (0.80mm) |
| Connector Type | Receptacle, Center Strip Contacts | Receptacle, Outer Shroud Contacts |
| Contact Finish Thickness | 3.9µin (0.10µm) | 8µin (0.20µm) |
| Number of Rows | 2 | 2 |
| Height Above Board | - | 0.461" (11.70mm) |
| Mated Stacking Heights | - | 13mm, 14mm, 15mm, 16mm |
-
1. What is a rectangular connector?
A rectangular connector is a connector with a basically rectangular shape and a basically rectangular mating surface. It is also an important category in the connector family. There are many varieties and specifications, and it is also widely used. It should be pointed out that the classification of rectangular connectors and printed circuit board connectors, strip connectors, and ribbon cable connectors is sometimes not strictly defined. For the same type of connector, some manufacturers classify it as a rectangular connector (approximately rectangular in shape), some as a printed circuit board connector (used in printed circuits), some as a strip connector (approximately long in shape), and some as a ribbon cable connector (connected with a ribbon cable). It is widely used in indoor cable connections, internal connections of equipment, and occasions where multiple rows of assembly are required.
-
2. Types of rectangular connectors?
1. In the past, it was mainly produced by enterprises under the Ministry of Electronics Industry, such as CA, CB, and CD rectangular connectors.
2. Now it is more commonly used, mainly produced by enterprises under the Ministry of Electronics.
3. J-type rectangular connectors, mainly produced by enterprises under the Ministry of Aviation and Aerospace.
4. Rectangular connectors produced according to the national military standard (GJB).
5. Rectangular connectors produced according to the International Electrotechnical Commission (IEC) standard.
-
3. How to connect rectangular connectors?
1. Crimping: It has high mechanical strength, good electrical performance, and high reliability.
2. Welding: It has the advantage of simple operation. However, it is easy to form a cold solder joint that is not easy to find due to welding methods, operating space, etc.
-
4. What are the types of rectangular connectors?
1. Pin-type rectangular connector: This is the most common type of rectangular connector. The metal pin is inserted into the interface hole and rotated to tighten to achieve conductive connection.
2. Snap-on rectangular connector: It is fixed with self-locking mechanisms such as spring sheets or clips, and is suitable for use in vibration environments.
3. SMD rectangular connector (SMT type): It is suitable for use in surface mount technology (SMT), which is convenient and fast.
4. Board-to-board rectangular connector: Mainly used for interconnection of board-level and system-level circuits, with the characteristics of high-density connection, low plug-in and pull-out times, and easy maintenance.
5. Wire-to-board rectangular connector: Suitable for the connection of internal signals and power of equipment, can withstand high current and high temperature environments, and has the advantages of easy installation and convenient maintenance.
