YBS2206G RAG vs RMB2S RCG
| Part Number |
|
|
| Category | Diodes - Bridge Rectifiers | Diodes - Bridge Rectifiers |
| Manufacturer | Taiwan Semiconductor Corporation | Taiwan Semiconductor Corporation |
| Description | BRIDGE RECT 1PHASE 800V 2.2A YBS | BRIDGE RECT 1P 200V 800MA MBS |
| Package | Tape & Reel (TR) | -Reel® |
| Series | - | - |
| Operating Temperature | -55°C ~ 150°C (TJ) | -55°C ~ 150°C (TJ) |
| Mounting Type | Surface Mount | Surface Mount |
| Package / Case | 4-SMD, Flat Leads | 4-BESOP (0.173\", 4.40mm Width) |
| Supplier Device Package | YBS | MBS |
| Technology | Standard | Standard |
| Diode Type | Single Phase | Single Phase |
| Voltage - Peak Reverse (Max) | 800 V | 200 V |
| Current - Average Rectified (Io) | 2.2 A | 800 mA |
| Voltage - Forward (Vf) (Max) @ If | 970 mV @ 2.2 A | 1 V @ 2 A |
| Current - Reverse Leakage @ Vr | 5 µA @ 800 V | 5 µA @ 200 V |
-
1. What is a bridge rectifier?
A bridge rectifier is a circuit composed of four diodes used to convert alternating current (AC) to direct current (DC). It is a common type of rectifier circuit widely used in devices such as power supplies and chargers.
-
2. What is the working principle of bridge rectifier?
The bridge rectifier converts the input AC power into DC power through an arrangement of four diodes. Every half cycle, two diodes conduct, converting both positive and negative half waves of alternating current into direct current in the same direction.
-
3. What are the advantages of bridge rectifier compared to single diode rectifier?
Bridge rectifier is more efficient than single diode (half wave) rectifier because it can use two and a half cycles of AC power, not just one and a half cycles, thereby improving the output power efficiency and stability.
-
4. What is the peak reverse voltage (PIV) of a bridge rectifier?
Peak reverse voltage (PIV) is the maximum voltage that a bridge rectifier can withstand when reverse biased. When selecting a bridge rectifier, the PIV should be at least twice the peak voltage of the input AC power to prevent diode breakdown under reverse voltage.
