W6A82-8SG-528 vs 8P1P002210GRB01
| Part Number |
|
|
| Category | Circular Connectors | Circular Connectors |
| Manufacturer | Conxall/Switchcraft | NorComp Inc. |
| Description | CONN PLUG FMALE 8POS GOLD SLDR | CONN RCPT FMALE 2POS GOLD SOLDER |
| Package | - | - |
| Series | Mini-Con-X? | QUIK-LOQ? 8P1P |
| Features | Backshell, Coupling Nut, UV Resistant | - |
| Mounting Type | Free Hanging (In-Line) | Panel Mount, Bulkhead; Through Hole |
| Termination | Solder Cup | Solder |
| Ingress Protection | IP67 - Dust Tight, Waterproof | IP50 - Dust Protected |
| Current Rating | 2A, 10A | 10A |
| Voltage - Rated | 250V | 500V |
| Contact Finish | Gold | Gold |
| Orientation | Keyed | Keyed |
| Number of Positions | 8 (6 + 2 Power) | 2 |
| Connector Type | Plug, Female Sockets | Receptacle, Female Sockets |
| Fastening Type | Bayonet Lock | Push-Pull |
| Shell Material, Finish | Thermoplastic | Polyacrylonitrile Butadiene Styrene (ABS), Polycarbonate (PC) |
-
1. How to wire a circular connector
1. Insert the wire into the pin hole inside the connector to ensure that the metal conductor is in full contact with the pin.
2. Use wire twisters to tighten the screws or clips on the connector to ensure good and firm contact between the connector and the wire.
3. Check if there is any exposed metal surface on the connector. If necessary, re-strip it.
4. Wrap the connected wires with electrical tape to prevent loosening or short circuit problems. -
2. What is the circular connector called
Circular connectors are also called circular electrical connectors, sealed circular connectors, aviation plugs, waterproof connectors, etc. Different names for different usage environments: waterproof connectors, waterproof plugs; sealed circular connectors, etc.
-
3. How to remove the circular plastic terminal head
1. Use scissors or flat-nosed pliers to cut off or remove the outer shell on the circular plastic terminal head to expose the internal wiring part.
2. Use a screwdriver to loosen the screws on the terminal head to remove the terminal head.
3. Gently pull the terminal head by hand to remove it from the wire.
4. If the terminal head is very tight, you can use flat-nosed pliers or pliers to increase the removal force.
5. If you need to replace a new terminal head, you can insert the new terminal head into the wire and tighten the screws to ensure that the wiring is firm. -
4. How many types of connectors are there?
1. Circular connector,
2. RF connector,
3. Rectangular connector:
4. SMB connector:
5. BNC connector;
